If you own a 2014 Jeep Cherokee, you know how important it is to keep your engine running smoothly. One key part of that is making sure your oil life monitor is reset after every oil change.
But how exactly do you reset the oil life in your Jeep Cherokee? If you’ve ever been unsure or worried about messing it up, this guide is for you. You’ll learn simple, step-by-step instructions that anyone can follow — no special tools or mechanic needed.
Keep reading, and you’ll have your oil life indicator reset in no time, helping you maintain your Jeep’s performance and avoid unnecessary service visits.
Oil Life Indicator Basics
The oil life indicator in a 2014 Jeep Cherokee helps track engine oil condition. It tells you when to change the oil to keep the engine healthy. Understanding how this system works can save you time and avoid costly repairs.
This system uses sensors and software to estimate oil quality. It bases calculations on driving habits, engine temperature, and mileage. The indicator appears on the dashboard, showing a percentage of oil life left. When the percentage gets low, it signals that an oil change is needed.
Purpose Of Oil Life Monitor
The oil life monitor helps maintain engine performance. It prevents old oil from causing damage or reducing efficiency. The system gives timely alerts for oil changes, avoiding guesswork. This feature supports better fuel economy and engine longevity.
When To Reset Oil Life
Reset the oil life indicator after every oil change. This action tells the system the oil is fresh and the monitor restarts. If you do not reset, the car may give false warnings. Resetting ensures accurate tracking of oil condition.
Credit: www.blauparts.com
Preparing Your Jeep Cherokee
Preparing your 2014 Jeep Cherokee is the first step to reset the oil life indicator. Proper preparation makes the process easy and safe. Take time to get your vehicle ready for this simple maintenance task.
Follow these steps carefully before you start the reset procedure. This ensures your Jeep is in the correct state and helps avoid errors.
Ensure Vehicle Is Parked Safely
Park your Jeep Cherokee on a flat surface. Engage the parking brake to prevent any movement. Keep the engine off but the ignition ready for the next steps. Safety is important to avoid accidents during the reset.
Ignition Settings To Use
Press the ENGINE START/STOP button twice without pressing the brake pedal. This action puts the ignition in the ON or RUN position without starting the engine. Wait for the dashboard lights to turn on fully before proceeding. This setting allows you to access the vehicle’s system needed for the reset.
Resetting Oil Life Using Steering Wheel Controls
Resetting the oil life on a 2014 Jeep Cherokee using the steering wheel controls is simple. It lets drivers keep track of oil changes without tools. This process uses the vehicle’s digital display and buttons on the steering wheel. Follow these clear steps to reset the oil life indicator quickly and easily.
Powering On Without Starting Engine
Press the ENGINE START/STOP button twice. Do not press the brake pedal. The dashboard will light up, showing the vehicle is on but the engine is off. This state allows access to the menu without running the engine.
Navigating To Vehicle Info Screen
Use the arrow buttons on the left side of the steering wheel. Scroll through the menu options on the dashboard display. Look for the “Vehicle Info” or “Settings” menu and select it by pressing the OK button. This screen shows important vehicle details, including oil life.
Selecting And Resetting Oil Life
Scroll down to find the “Oil Life” option. Press the OK button to enter the oil life menu. Select “Reset” to clear the oil life indicator. Confirm the reset if asked. Turn off the vehicle, then start the engine to verify the oil life has reset to 100%.
Resetting Oil Life Using Gas Pedal Method
The gas pedal method is a simple way to reset the oil life on a 2014 Jeep Cherokee. It uses the vehicle’s ignition and gas pedal to clear the oil life monitor. This method does not require any special tools or equipment. Follow the steps carefully to ensure the oil life resets correctly.
Turning Ignition To Run Position
Start by sitting in the driver’s seat. Do not press the brake pedal. Press the ENGINE START/STOP button twice. This action turns the ignition to the RUN position. The dashboard lights will turn on. Make sure the engine does not start during this step.
Pressing And Holding Gas Pedal
Once the ignition is in the RUN position, press the gas pedal fully. Hold the gas pedal down for about 10 seconds. Keep the pedal pressed steadily without releasing it. The oil life indicator will begin to reset during this time. After 10 seconds, release the gas pedal slowly.
Verifying Reset Completion
Turn the ignition off by pressing the ENGINE START/STOP button once. Wait a few seconds, then turn the ignition back to RUN. Check the dashboard for the oil life message. The oil change required light should be off. This confirms the reset is complete and successful.
Resetting Oil Life On Older Models
Resetting the oil life on older models of the 2014 Jeep Cherokee requires a slightly different approach than newer vehicles. These older versions often have a keyed ignition instead of a push-button start. Understanding the correct steps ensures the oil life monitor resets correctly. This helps maintain accurate service reminders and keeps your Jeep running smoothly.
Keyed Ignition Specific Steps
Start by inserting the key into the ignition. Turn the key to the ON position without starting the engine. Watch the dashboard lights carefully. Locate the accelerator pedal and fully press it three times within 10 seconds. After the third press, turn the key to the OFF position. Wait a few seconds and then start the engine. The oil life indicator should now show 100% or the reset message will disappear.
Common Differences To Note
Older models use the gas pedal to reset, unlike newer ones with steering wheel controls. The timing between pedal presses must be quick but smooth. The engine must not run during the reset process. If the reset does not work, repeat the steps more slowly. Some models may require the brake pedal pressed instead; check your owner’s manual. Always ensure the ignition is in the ON position, not the START position, during the reset.
Troubleshooting Reset Issues
Resetting the oil life indicator in a 2014 Jeep Cherokee usually works smoothly. Sometimes, the reset may fail or the indicator might not update. Troubleshooting these issues saves time and avoids confusion. Understanding what to check helps fix the problem quickly.
When Reset Doesn’t Work
Check if the ignition is in the correct position during reset. The engine should be off, but the ignition on (RUN mode). Using the steering wheel buttons, ensure you navigate to the right menu. The oil life must be at zero before resetting.
Make sure the battery has enough charge. Low voltage can stop the reset process. Look for any error codes on the dashboard. Sometimes, a pending maintenance message blocks the reset.
If the reset still fails, try turning off the vehicle completely. Wait a minute, then repeat the steps. Some Jeep models need the engine started after reset. Confirm the oil change light turns off after restarting.
Additional Tips And Tricks
Use the driver information display for easy access to oil life settings. Clean the steering wheel buttons if they are sticky or unresponsive. A software update at the dealership may be needed if problems persist.
Consult the owner’s manual for model-specific instructions. Avoid disconnecting the battery to reset oil life; it can cause other system errors. Regular oil changes and resets keep your Jeep running well and maintain warranty coverage.
Maintaining Oil Life For Longevity
Maintaining the oil life of your 2014 Jeep Cherokee ensures the engine runs smoothly for years. Good oil health protects engine parts from wear and tear. It also improves fuel efficiency and reduces emissions. Taking simple steps helps keep your oil effective and your Jeep reliable.
Regular Oil Change Intervals
Changing oil regularly prevents dirt buildup and engine damage. Follow the manufacturer’s recommended schedule, usually every 5,000 to 7,500 miles. Frequent oil changes keep the engine clean and lubricated. This reduces friction and heat that can harm engine parts.
Ignoring oil changes can cause sludge and poor engine performance. Resetting the oil life indicator after each change helps track the next service. This reminder keeps your Jeep on a healthy maintenance routine.
Using Quality Oil And Filters
Choose high-quality oil that matches Jeep Cherokee’s specifications. Good oil flows better and protects the engine in extreme temperatures. Using the right oil viscosity improves fuel economy and engine life.
Also, replace the oil filter with a quality one during each oil change. Filters trap dirt and metal particles from the oil. Clean filters allow smooth oil flow, preventing engine wear. Together, quality oil and filters keep the engine parts safe and functioning well.
Credit: www.blauparts.com
Credit: www.youtube.com
Frequently Asked Questions
How Do I Reset My Oil Life On My 2014 Jeep Cherokee?
Press the Start button twice without braking to ON/RUN (engine off). Use steering wheel arrows to find Vehicle Info > Oil Life. Select Reset, turn ignition off, then start engine to confirm reset.
How Do You Reset Your Oil Life On A Jeep Cherokee?
Press ENGINE START/STOP twice without brake to turn ignition ON. Use steering wheel arrows to navigate to Vehicle Info > Oil Life. Select reset. Turn ignition off, then start engine to confirm oil life reset.
How Do I Reset My Jeep After An Oil Change?
Press the Start button twice without pressing the brake to enter RUN mode. Use steering wheel arrows to select Vehicle Info, then Oil Life. Reset the oil life indicator. Turn off ignition, then start the engine to confirm the reset.
How To Reset Engine Light On 2014 Jeep Cherokee?
Turn ignition ON without starting engine. Use steering wheel arrows to access Vehicle Info > Oil Life. Select reset. Turn ignition OFF, then start engine to confirm light is off.
How Do I Reset Oil Life On A 2014 Jeep Cherokee?
Turn the ignition on without starting the engine. Use the steering wheel buttons to find Oil Life. Press and hold the reset button until it shows 100%.
Conclusion
Resetting the oil life on your 2014 Jeep Cherokee keeps your engine healthy. Follow the simple steps carefully to clear the oil change message. This helps the vehicle track oil life accurately. Regular resets after oil changes prevent confusion and keep maintenance on schedule.
Take a moment to check your dashboard after resetting. Clean resets ensure your Jeep runs smoothly and lasts longer. Stay on top of oil changes for better performance. Your Jeep will thank you with reliable driving every time.
