Seeing your Honda HR-V’s tire pressure light come on can be confusing and a bit worrying. But don’t stress—this warning is there to keep you safe by alerting you when your tires need attention.
The good news is that resetting this light is usually quick and simple once your tires are properly inflated. Whether you’re new to the HR-V or just want to save a trip to the mechanic, this guide will walk you through how to reset the tire pressure light step-by-step.
Follow along, and you’ll have your HR-V back on the road with confidence in no time.
Credit: techinfo.honda.com
Check Tire Pressure
Checking your tire pressure is the first step to reset the tire pressure light on your Honda HR-V. Proper tire pressure keeps your car safe and helps save fuel. Low pressure can cause the warning light to turn on.
Use a tire pressure gauge to measure the air in each tire. Make sure to check all tires, including the spare. Adjust the pressure to the recommended levels for your vehicle.
Locate Recommended Psi
Find the recommended PSI (pounds per square inch) for your Honda HR-V tires. This information is usually inside the driver’s side door frame or in the owner’s manual. It tells you the exact pressure your tires need.
Do not guess the PSI. Too much or too little air can cause problems. Always follow the manufacturer’s recommendation for the best performance and safety.
Inflate All Tires Even Spare
Check the pressure of all four tires and the spare tire. The spare tire often gets forgotten but must also have the correct PSI. Inflate each tire to the recommended level.
Use an air compressor at a gas station or a home pump. Inflate slowly and check frequently. Proper inflation will help reset the tire pressure light and keep your ride smooth.
Use Tpms Reset Button
The tire pressure monitoring system (TPMS) in your Honda HR-V alerts you when tire pressure is low. After adjusting tire pressure, the warning light might stay on. Using the TPMS reset button is a quick way to clear this alert. This method is simple and does not require special tools.
Follow the steps below carefully to reset the tire pressure light using the TPMS reset button. This helps the system recognize the new tire pressure and turns off the warning light.
Find The Tpms Button
The TPMS reset button is usually located under the dashboard, near the steering wheel. Look below the steering column or near the fuse box area. It might be a small, round button labeled “TPMS” or have a tire icon. Use a flashlight if needed to spot it easily.
Press And Hold Until Light Blinks
Turn the ignition to the ON position, but do not start the engine. Press and hold the TPMS reset button for about 3 seconds. Watch the tire pressure light on the dashboard. It will blink slowly, indicating the reset process has started. Release the button once the blinking begins.
Drive the vehicle at a speed above 25 mph for 10 to 30 minutes. This allows the system to detect the new tire pressure settings. The light should turn off once the reset is complete. If it stays on, check tire pressures again or repeat the reset process.
Reset Via Infotainment System
Resetting the tire pressure light on your Honda HR-V through the infotainment system is a simple process. This method uses the vehicle’s touchscreen to recalibrate the Tire Pressure Monitoring System (TPMS). It saves time and avoids manual resets under the hood.
Follow the steps carefully. Make sure the car is ready for the reset before starting.
Turn Ignition On And Set To Park
Start by turning the ignition to the ON position. Do not start the engine. Shift the gear to the PARK position. This ensures the vehicle is stationary and safe for the reset process.
Navigate To Tpms Calibration
Access the infotainment touchscreen. Tap the HOME button to open the main menu. Select SETTINGS from the options. Next, choose VEHICLE, then find and tap TPMS CALIBRATION. This menu controls the tire pressure reset.
Start Calibration Process
Press the START button to begin calibration. The system will scan all tires for correct pressure. Wait for the confirmation message that the reset is complete. Turn off the ignition and then restart your vehicle to check the light.
Drive To Complete Calibration
After resetting the tire pressure light on your Honda HR-V, driving the vehicle is essential. This step completes the calibration process for the Tire Pressure Monitoring System (TPMS). The system needs real-time data from moving tires to verify the correct pressure. Without driving, the reset will not fully take effect, and the warning light may stay on.
Importance Of Driving After Reset
Driving allows the TPMS sensors to check each tire’s pressure accurately. The system recalibrates while the vehicle is in motion. It confirms that the tires maintain the right pressure levels. This step helps avoid false alerts or warnings later. It also ensures your safety by keeping the monitoring system active and reliable.
How Long To Drive
Drive your Honda HR-V for about 10 to 15 minutes at speeds above 30 mph. This duration gives the sensors enough time to collect and process pressure data. Choose a safe, open road for smooth driving. Avoid stopping frequently during this period. After driving, the tire pressure light should turn off automatically.
Troubleshoot Persistent Light
The tire pressure light on your Honda HR-V may stay on even after inflating the tires. This persistent light signals an issue that needs attention. Diagnosing the cause helps avoid unsafe driving conditions and keeps the system working correctly.
Check For Sensor Issues
Tire pressure sensors can fail or get damaged. Dirt, corrosion, or weak batteries may cause sensor problems. Scan the system with a TPMS tool to find faulty sensors. Replace or repair bad sensors to clear the warning light.
Inspect Tires For Damage
Look closely at each tire for cuts, punctures, or worn areas. Damaged tires lose air pressure quickly. Even small leaks can trigger the tire pressure light. Fix or replace tires that show signs of damage to maintain safe pressure.
Consider Spare Tire Problems
Some Honda HR-V models monitor the spare tire’s pressure too. A low or flat spare can cause the warning light to stay on. Check the spare tire pressure regularly. Inflate it to the recommended level or repair if needed.
Credit: www.youtube.com
Prevent Future Tpms Alerts
Preventing future Tire Pressure Monitoring System (TPMS) alerts on your Honda HR-V saves time and keeps you safe. Simple habits help maintain proper tire pressure. This stops the warning light from turning on unnecessarily. Consistent care extends tire life and improves fuel efficiency. Follow these easy tips to avoid frequent alerts.
Regular Tire Maintenance
Check your tires for damage and wear regularly. Rotate tires every 5,000 to 7,000 miles. This ensures even wear and better performance. Inspect the valve stems and caps to prevent air leaks. Replace tires that are too worn or damaged. Good tire condition helps keep pressure stable.
Seasonal Pressure Checks
Temperature changes affect tire pressure. Check tire pressure at the start of each season. Cold weather lowers pressure, warm weather raises it. Use a reliable pressure gauge for accuracy. Inflate tires to the pressure recommended in your owner’s manual. This prevents false TPMS alerts caused by weather shifts.
Credit: www.geraldhondacountryside.com
Frequently Asked Questions
How To Reset Honda Low Tire Pressure Light?
Inflate all tires to the recommended PSI. Turn ignition on and put the car in Park. Use the touchscreen or steering wheel to select Home > Settings > Vehicle > TPMS Calibration. Choose Calibrate and confirm. Drive the vehicle to complete the reset and turn off the light.
How To Reset Warning Lights On Honda Hrv?
To reset warning lights on a Honda HR-V, turn the ignition on and put the car in Park. Use the touchscreen or steering wheel buttons to navigate to Home > Settings > Vehicle > TPMS Calibration. Select Calibrate and confirm.
Drive the vehicle to complete the reset process.
Where Is The Tpms Reset Button?
The TPMS reset button is usually located to the left of the steering wheel. Some Honda HR-V models use the infotainment system: go to Home > Settings > Vehicle > TPMS Calibration to reset. Ensure the engine is on and the vehicle is in Park before starting.
Why Is My Tire Pressure Light Still On After Filling Tires On My Honda Cr-v?
Your Honda CR-V’s tire pressure light stays on because the TPMS needs resetting. Ensure tires have correct PSI, then reset via the infotainment or TPMS button. Keep the engine on and the vehicle in Park during calibration. Driving may be required to complete the reset.
How Do I Reset The Tire Pressure Light On A Honda Hr-v?
Ensure all tires are properly inflated, then press and hold the TPMS reset button until the light blinks.
Conclusion
Resetting the tire pressure light on your Honda HR-V is simple. First, check and inflate all tires to the correct pressure. Then, use the TPMS button or the infotainment system to reset the light. Keep the engine on and the car in Park during this process.
Drive for a few minutes to complete calibration. This quick routine helps keep your vehicle safe and alerts you to tire issues. Regularly checking tire pressure improves driving comfort and fuel efficiency. Stay safe on the road by maintaining proper tire care.
